… developed for typical operating temperatures up to 400ºC, and up to 600ºC in the short-term range. It also shows good resistance to general …

… solidification and reheat cracking. NILO Alloy 36 is available for Tig, Mig and SAW process. … NILO Alloy 36, Invar, cast Iron … NILO …

… Existe en TIG … 52 … SELECTARC INOX 16 …

… of the weld deposit will degrease 16% at 300°C and about 30% at 600°C. Excellent alloy against thermal shock, abrasion, erosion, …

… subsequent passes until the root surface temperature stays below 600 degrees F. Backup shielding also should be used on the back surface …

… CEWELD® ER 80S-B3L is a low alloy copper-coated TIG rod with 2.25% Cr and 1% Mo content, with low carbon content (less …

… for creep resistant service for working temperatures up to 600 ºC.  … 2,25% Cr, 1% Mo  1.7015, 1.7131, 1.7147, 1.7380, 1.7337, …

… excellent welding properties under mixed gas M21 (pure Argon for the Tig process) suitable for high strength fine grain steels in … Weldox 500, Hardox, Domex 460 MC, Domex 500 MC, Domex 550 MC, Domex 600 MC, Domex 650 MC, Domex 700 MC, Hardox 400, XAR 400, Dillidur 400, …

… welding wires that are covered in AWS A 5.14 such as alloy 82, Inconel 600, 625, 601, 825, C276, alloy 59 etc. Basicity: about 3,3 (according … welding wires that are covered in AWS A 5.14 such as alloy 82, Inconel 600, 625, 601, 825, C276, alloy 59 etc. … FL 839 … 14174: SA FB 2 DC …

… Existe en TIG … 52 … SELECTARC 20/10MNBS …